Are you curious to learn how to power outdoor security cameras? At all times, you should turn on a security camera. You never know when you’ll need to check footage from the security camera, and the last thing you want is for it to be off when you need it. That is why it is critical to ensure that the security camera is always powered up.
There are several types of security cameras in the market with different power supply options, such as the most popular wireless security cameras, wire-free CCTV cameras, and PoE cameras. It can be tough to tell how they gain power based on their names.
It’s easy to overlook that outdoor security cameras require a consistent and reliable power source. This holds for the vast majority of wireless devices. However, they must have a stable power source for these cameras to work correctly. Different types of security cameras use other power sources. Power is required for all security cameras, including outside cameras.
This post will provide you with information and options to assist you in determining how to power your security camera.
Steps To Install An Outdoor Security Camera’s Power Supply
You’ll need to survey several outdoor locations. These include (but are not limited to) the front entrance or front porch, the driveway, the back yard, the garage, and so on. The majority of DIYers should be able to install these outdoor security cameras. For beginners, though, it can be a bit of a challenge.
If you follow these simple steps, you will be able to correctly and without difficulty install the security camera’s power supply.
Locate And Mark The Appropriate Camera Location
Make a note of where you want the security camera to be installed. Choose a location where the outside security camera will have a good view of the surrounding area. It should also be at an accessible site that does not interfere with the residence.
Ideally, you’ll be able to choose a spot that offers some weather protection. It is essential to ensure that the CCTV camera is not overly exposed to moisture, excessive sunlight, or high heat, as these can all influence the device.
Determine How The Wires Will Be Routed
First of all , you must decide which route you want the data and power from the security cameras to take. It is preferable to pick a short course that allows the specific wires to be buried quickly. The longer the distance, the more complex the installation and the greater the risk of defects or material fatigue over time.
Obtain A Power Cord
After you’ve decided on the cable’s path and length, you’ll need to prepare the materials.
The sort of cable you’ll need is determined by the camera you’ve chosen.
If you’re installing a PoE security camera, make sure you have a reliable, long-lasting Cat5 or Cat6 cable that can transport both data and power.
It Would Be Best If You Have Protected Wires.
The next step is to make sure the cables are well-protected against damage. Investing in high-quality wiring is an obvious first step. Popular brand names and excellent customer evaluations, such as those found on Amazon, will assist you in selecting quality material, even if the difference is not immediately apparent.
To safeguard the cables from humans and animals, metal conduits or PVC guards should be installed.
Drill The Required Holes
The next step is to drill holes wherever the cable needs to pass through a wall or stud.
The first hole to drill is usually for running the cables from your house to the exterior security camera’s placement. Make sure the drill you’re using can make holes big enough for the wires to fit through. Drill the holes carefully and with minimal effort to prevent making mistakes. Also, make sure you drill on the studs. If possible, avoid hitting an outside wall since it may compromise its water, cold, and heat resistance.
Pull The Wires.
The wiring for the exterior security camera will be pulled next. One person should stand on one end to verify that the wires are even. On the other end, you should remove the wires slowly. This will prevent nicking and material damage to the cables. Also, make sure the cables you’re pulling aren’t intertwined.
Connect The camera to the cables.
The next step is to connect the power supply to the camera after the wires have been drawn.
Conclusion
We hope that our step-by-step advice has helped secure and effectively install power for your outdoor security cameras. An outdoor security camera consumes a relatively minor amount of power in total.
You can discover the specific quantity of energy consumption on the security camera’s specification sheet. The power range is usually between 4 and 10 watts. More feature-rich systems, such as cameras with superior night vision technology, tend to require a lot more power.
