Are you looking for methods on how to connect a security IP camera to a pc or a Mac? Well, It’s a good idea to connect your security IP cameras to a computer so that they may be monitored and recorded 24 hours a day, seven days a week.
You can easily connect your security IP camera to your PC/Mac using the below-mentioned methods. There are five different methods to connect an IP camera to a PC /Mac that make it easy. You don’t need to look elsewhere since We’ve got five options for you. Continue reading.
5 Methods to connect a security IP camera to PC/Mac
Method 1
Connect a Security IP Camera Directly to PC/Mac (without Internet)
The methods below show you how to connect your security IP camera to a PC or Mac without using an NVR or DVR, a router network, or wifi, and without any costs or lengthy setup.
Charge security camera.
You will need a power adapter to connect the camera and charge it. A power adaptor is usually included when you purchase a wifi IP camera. In the case of a PoE camera, inquire with the vendor and buy one compatible with the camera.
Connect the camera and the computer
you would usually link a 2-in-1 or 3-in-1 cable to the camera. Use the network cable to connect to the network connection from that cable. Then click the network cable’s opposite end to the PC. Turn off a network on your computer if one already exists, and make sure it’s turned off.
Scan for the IP address
Essentially and practically, the security camera is now connected to your PC. However, you are still unable to view the camera on your computer. Now you must scan for and determine the IP address of the camera. In general, you should purchase surveillance software from the same vendor as the camera.
Change the computer’s IP address.
As you proceed to Step 3, you acquire the camera’s default IP address. Now, to change the IP address of the computer. !Now that your IP camera and PC are on the same LAN, your IP camera will be able to communicate directly with your PC.
Method 2
Connect a wifi Camera to Computer via Router
You can connect your wireless or wifi camera to your computer wirelessly via your router if you have a wifi network and need to view the IP camera when you’re not there remotely.
Here is how:
Charge wifi camera
To get the camera plugged in and charged, use the power adapter.
Connect the camera and router to the network
For the first configuration, a WiF camera must connect to the router through a network connection, as the new camera will not identify and auto-pick up a network it has never used. You can only disconnect the link from the camera and the router once the wifi settings are perfect.
Watch the IP camera on PC/Mac.
Launch the surveillance software to add the camera and watch the live video directly on the computer.
Method 3
Connect a PoE IP Camera to Computer with PoE Injector
Selecting a PoE injector/switch is another simple way to watch security cameras on a PC. To connect your IP camera to your PC /Mac, you’ll need a PoE switch or a PoE injector if your router does not support PoE. You can use this device to connect your camera to your computer directly.
Connect the camera to the PoE switch
To begin, connect the PoE IP camera to the PoE injector or switch.
Connect an Ethernet cable to the router
Plug the PoE injector into an Ethernet cable and connect it to the Network Router in the second step.
Connect the PoE switch to the outlet
In the third step, Plug the PoE switch device’s power adapter into a wall outlet. Now you finish the connection joints, test them a few minutes later, and enjoy seeing camera feeds on your PC.
If you have a wireless IP camera, you must first connect it to the router and set up its settings. You can click the wireless IP camera to your network once you set up the wifi network configuration and link it to your network.
Method 4
Connect Security Cameras to a PC Using an NVR
Here Are the Steps to View Security Cameras on a PC Using an NVR
Step 1
If your NVR does not have built-in wifi, you will need to connect it to the Internet via a router using an Internet Ethernet line.
Step 2
The HDMI cable should have one end connected to the HDMI jack on the back of the NVR.
Step 3
The second end of the HDMI cable should be plugged into the back of your PC; if your PC has VGA ports, you can use a VGA cable and follow the exact instructions to connect to it.
Method 5
Connect a CCTV security camera system to a computer without a router network
This is a simple method to connect an IP camera to a pc or Mac.
Connect NVR to camera
Link all of the gadgets you received when you receive the new IP camera system you purchased – connect the NVR to your computer’s monitor and mouse, use the power adapters to charge the NVR and cameras, and so on.
When using a wifi system, once the wifi NVR and wifi cameras are charged, they automatically connect and begin communicating. Connect the PoE cameras to the NVR using the network wires provided for a PoE setup.
Start watching
The startup and setup wizard will appear, guiding you through the process of watching your cameras and making additional configurations.
Conclusion
So that’s all we’ve got for today. These are the best 5 methods to connect a security IP camera to a PC/ Mac. There are a variety of CCTV camera systems available; some are complicated, while others are pretty simple to design and implement. In order to connect one or more CCTV cameras to the computer via which you plan to monitor video feeds, the general processes are the same in all circumstances.
